thewhitewarrior

hi all,
ive asked this before but i need to know again, sorry,
what is the way to pipe an external waste gate up, it has the side and top pipes, thanks again,
phil.

DJ_Jon

iTrader: (7)

Which turbo are you using and do you have the correct up & down pipes or are you having them fabricated?

thewhitewarrior

i got a twisted tdo6 25g running at top end of 400 bhp, had the up-pipe and everything made, its been on for a bit but took the engine out for a stroker conversion, now putting it all back in and ive forgot how i piped the waste gate up.

DJ_Jon

iTrader: (7)

If it's a tial wastegate the bottom bolts to the up pipe & the other output to a screamer pipe or back into the downpipe.

This is an example of a vent to atmosphere setup on a Subaru:
http://img.photobucket.com/albums/v334/wcbjr/uppipe.jpg

thewhitewarrior

oh sorry, i nevery explained myself very well, ive got it all on and have had for a bit, in my haste to get the engine out i never noted down the vacumm piping of it,
its just the vacumm pipes i need to know how they go.
thanks for the pic, mine has a screemer pipe on.
phil.

FB Tuning

iTrader: (30)

COM Port on the solenoid to top of wastegate
NC Port on the solenoid to bottom of wastegate, "T"d to pressure source

thewhitewarrior

thanks but witch is what on the solenoid? top pipe on solenoid goes to ? and bottom pipe on solenoid goes to?
thanks,
phil.

thewhitewarrior

sorry, where does the top pipe on the solenoid go to and where does the bottom pipe on the solenoid go to.
thanks
phil.

FB Tuning

iTrader: (30)

What solenoid are you using?

thewhitewarrior

standard for running in.

thewhitewarrior

???