jay_jay

Hey

Couple nights ago my car died out and wouldnt start, was due to the temp sensor.

so i changed the sensor (2nd hand sensor) and now the car wont start at all, i put old sensor back in and she still wouldnt kick.

I removed the IC pipes , some small turbo pipes, and idle control plug and throotle position plug , i put them all back on.

car just wont start.

any ideas

r1c

iTrader: (9)

What model car is it, in my experience a temp sensor shouldn't stop your car starting!! Have you checked your fault codes?

jay_jay

No fault codes coming up, its a 96 classic

r1c

iTrader: (9)

Have you got a spark? Fuel?

jay_jay

how can i check fuel ?

Splitpin

Do you hear the fuel pump prime when you turn the ignition on? As above, a temp sensor, even completely broken or disconnected, won't prevent startup.

wayno

iTrader: (3)

A disconnected Crank Sensor would stop the engine starting, the plug is located underneath the alternator

r1c

iTrader: (9)

If you have no spark I'm pretty sure you would have no fuel either, I'd check for a spark first,