Front Bumper Removal
#1
Anyone know how hard a job it is too remove the front bumper on a 95 wrx and whre the bolts are located. Also does the radiator or any other items have too b removed???
Cheers
Mark
Cheers
Mark
#2
You have 4 bolts inside the engine bay which are about 17mm, look behind the headlights, you will see the heads. Then you have to remove the under arch splash guards, (little plastic rivet things) look up towards the corner where the front wing joins the plastic of the bumper, there are 2 (one on each side) poz head screws.
There might be a 10mm (head) bolt under the number plate, there is on my 99.
If anyone knows any more than that please shout, mine was a while ago and on a 99 car.
You dont have to remove rads etc, that is all behind the metal bit.
Good luck, MD.
There might be a 10mm (head) bolt under the number plate, there is on my 99.
If anyone knows any more than that please shout, mine was a while ago and on a 99 car.
You dont have to remove rads etc, that is all behind the metal bit.
Good luck, MD.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM