stidave78

iTrader: (2)

hi guys, just wondering if any of you have had problems with the fuellab prodigy pumps not priming or playing up? i have a 45ltr atl saver cell mounted in the boot with 2 fuel pick ups into 2 facet fuel pumps which feeds a atl swirl pot, there is a -8 outlet into the fuellab pump, then filter then rails etc. the car as run fine for 3/4 weeks but now the car cuts out after about 30 seconds, i've had a guy come out to check all the wiring and relay etc and all is ok, there is 12+ volts to the pump but it primes intermitantly, it was running on the low speed so i changed it to the high speed setting and it did'nt prime at all, relay still clicks, so i fitted it back to low speed but pump still does not prime. just wondered if anybody had encontered this problem before and if there is anything i can do? the pump is brand new! thanks