what does it do??
i want to use it as a cold air feed to my I.K

 

The vent feeds the air ducts to the brakes.
Take care that the car does not injest water from having the air intake that low.

 

mmm mabe i leave it like the brales cool just thinking where can i get a feed from?? pre facelift.
its only the feed to it hosing not the filter down at the bumper

 

Use some of that flexi hose to direct air to the filter by placing it to the driver side end of the grille, or the maw in the bumper.... If there's room to do it of course.

 

no room. its not looking good :-(

 

im even considering morettes but dont reali want them

 

In that case it's gotta be the driver side front foglight removed and a STi replica cover put on with hole in, etc. You can buy these covers pre-moulded with the hole in, on eBay...

Oh and put a cover on the passenger side too, so it don't look pony

 

arite mate ive just put morrettes on my classic and i already have a front mount but i do use the drivers side lense close to the grill as a cold air feed straight to indunction kit and its all sealed in a box if u bought them u could do the same as me and also use one of the lenses on the passenger side to cold air feed intercooler i think thats ure best bet mate

 

any pics??? cheers. matt

 

mat, here is that cold air feed foglight cover set:-

Subaru STI Fog light Air Intake Duct & Cover 92/01 WRX on eBay (end time 19-Sep-09 22:17:33 BST)


...Ported 'ram' air intake to fix to the end of flexi pipe too:-

http://cgi.ebay.co.uk/Ram-Air-Intake...d=p4634.c0.m14

You could also fit another of these to the air filter end of the pipe, so the air gets directed over more of the filter's surface area, etc. (plus it'll look good and finished off).

 

if ure needing sum of they cold air ducts thats on ebay i have a spare 3 if u want them there black also just like the ad that joz8968 gave ya