Oil light on dashboard not working after fitting oil pressure gauge.
#1
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Jan 2007
Location: Gloucestershire
Posts: 2,541
Likes: 0
Received 0 Likes
on
0 Posts
Oil light on dashboard not working after fitting oil pressure gauge.
I've got more problems now after fitting my Prosport gauges at the weekend !
I've fitted the sender for the oil pressure gauge using the Scoobyparts oil pressure/temp fitting kit. The original sender is fitted into the end of the adaptor. Now with the ignition on the oil light doesn't come on as it should do,i've checked all the wiring etc and it all looks ok !
Anyone got any ideas ?
I've fitted the sender for the oil pressure gauge using the Scoobyparts oil pressure/temp fitting kit. The original sender is fitted into the end of the adaptor. Now with the ignition on the oil light doesn't come on as it should do,i've checked all the wiring etc and it all looks ok !
Anyone got any ideas ?
#6
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
It works by being screwed into the block and gets its ground signal through the block and threads.
You need to ground the metal part of the sensor or the adaptor it is now screwed into just not the spade connector on the end
You need to ground the metal part of the sensor or the adaptor it is now screwed into just not the spade connector on the end
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM