pin-outs on 94/95
07 June 2009, 08:02 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
pin-outs on 94/95
hi,
im after the pin outs on the 94/95 4 plugged ecu, i am looking for the no3 injector wire as its showing 12v, also as it is showing 12v would the injector work ok still? thanks phil.
im after the pin outs on the 94/95 4 plugged ecu, i am looking for the no3 injector wire as its showing 12v, also as it is showing 12v would the injector work ok still? thanks phil.
07 June 2009, 08:14 PM
#2
Scooby Regular
Join Date: Mar 2008
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
NorthUrsalia.com: Wiring Diagrams And ECU Pinouts
might help. normally the ground is switched i think and should pulse when you crank engine
might help. normally the ground is switched i think and should pulse when you crank engine
07 June 2009, 11:11 PM
#5
Scooby Regular
Join Date: Mar 2008
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Use a seperate ground block or something and you should have 12v on 1 side of plug and the other side will be the switching ground that's if imprezas switch inj this way, I would think so. If you suspect the ecu at fault then use plug from adj inj just for test
Thread
Thread Starter
Forum
Replies
Last Post
cap_p
General Technical
2
04 August 2015 04:59 PM