Towbar fitting to a MY00 Classic Wagon
#1
Scooby Newbie
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Towbar fitting to a MY00 Classic Wagon
Hi all can anyone tell me how you bolt a towar onto a Classic Wagon. I can not see how you can bolt anything to it due to the tow-eye bracket in the way on one side or lowering the exhaust on the other due to a plate being fitted under the rear backbox hanger.I was going to fabricate a de-tachable one for towing a motocross bike but can`t seem to see how you can bolt it to the chassis itself.thanks for any advice..
#2
Scooby Regular
Join Date: Jul 2009
Location: shropshire
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
towbar
hi mate bit late on the reply but just fitted a towbar to my classic wagon..
On the drivers side you remove the towing eye (3 bolts) and on the passenger side you unbolt the exhaust hanger (4 bolts) these are then used to reattach the towbar..if you have a large tailpipe on your exhaust though it will catch a bit
On the drivers side you remove the towing eye (3 bolts) and on the passenger side you unbolt the exhaust hanger (4 bolts) these are then used to reattach the towbar..if you have a large tailpipe on your exhaust though it will catch a bit
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
03 November 2021 11:07 AM