Towbar fitting to a MY00 Classic Wagon
 

Hi all can anyone tell me how you bolt a towar onto a Classic Wagon. I can not see how you can bolt anything to it due to the tow-eye bracket in the way on one side or lowering the exhaust on the other due to a plate being fitted under the rear backbox hanger.I was going to fabricate a de-tachable one for towing a motocross bike but can`t seem to see how you can bolt it to the chassis itself.thanks for any advice..:)

towbar
 

hi mate bit late on the reply but just fitted a towbar to my classic wagon..
On the drivers side you remove the towing eye (3 bolts) and on the passenger side you unbolt the exhaust hanger (4 bolts) these are then used to reattach the towbar..if you have a large tailpipe on your exhaust though it will catch a bit