fuel sender t-piece getting hot
10 April 2009, 08:30 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: bedford
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
fuel sender t-piece getting hot
hi all,
just fitted my metal t-piece in for my defi gauges sender,after driving around for a while to see if its working ok i felt the t-piece and found it to be very hot,was just woundering if this would be ok and will it catch fire.
just fitted my metal t-piece in for my defi gauges sender,after driving around for a while to see if its working ok i felt the t-piece and found it to be very hot,was just woundering if this would be ok and will it catch fire.
10 April 2009, 09:46 PM
#2
Scooby Regular
iTrader: (1)
Join Date: Apr 2005
Location: In the Flatlands of Lincolnshire
Posts: 2,892
Likes: 0
Received 0 Likes
on
0 Posts
Is it for a electrical sender, if so you could have a poor conection that is causing the sensor to heat up
Last edited by 360ste; 10 April 2009 at 09:48 PM. Reason: not read fully
10 April 2009, 10:24 PM
#3
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: bedford
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
hi 360ste,
its not the actual sender that is heating up(i dont think), its the metal t-piece that gets hot just worried it might get so hot it catches fire as the fuel was in a rubber fuel pipe before, but cut a piece out and added a metal t-piece to hold the sender.
its not the actual sender that is heating up(i dont think), its the metal t-piece that gets hot just worried it might get so hot it catches fire as the fuel was in a rubber fuel pipe before, but cut a piece out and added a metal t-piece to hold the sender.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM