idle problems, please help!?
#1
idle problems, please help!?
my impreza wrx, is reving its self on idle, and if i boot it and put the clutch down to slow down,the revs drope rite down to nothing, and then it cuts out??
any suggestion on why it is doing this?
air flow sensor was my thought?
its doing my head in!!
thanks.
any suggestion on why it is doing this?
air flow sensor was my thought?
its doing my head in!!
thanks.
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
you mention an induction kit and a fmic in your other post..
either you have killed the maf sensor due to above or it needs setting up for the mods fitted.
Simon
either you have killed the maf sensor due to above or it needs setting up for the mods fitted.
Simon
Trending Topics
#8
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
the inducvtion kit you have fitted won't help the maf..
make sure it is not covering the maf in oil and / or dust.. also secure the maf housing / filter to the body of the car, not the engine as vibrations kill the maf.
Simon
make sure it is not covering the maf in oil and / or dust.. also secure the maf housing / filter to the body of the car, not the engine as vibrations kill the maf.
Simon
#10
Scooby Regular
iTrader: (1)
Join Date: Jan 2009
Location: reading
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Im having the exact same problem on my 95 WRX. Its not the MAF the idle control valve or the water temp sensor as they have all been replaced. It wasn’t cheap and didn’t sort it. Getting a bit fed up with it now.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
supshon
General Technical
2
03 October 2015 08:06 PM