HELP with B R REV limiter
#1
HELP with B R REV limiter
Can anyone give me info for wiring the above to a uk2000 with ppp.
this is how its wired at the minute
red-posative ecu terminal 9-plug 136
black-earth ecu terminal 17 plug 134
yellow-tacho ecu ternimal 14 plug 135
white-hand brake switch (earth)
green-tryed cam shaft +/crank shaft +terminals 5 and 6 plug 136 and also tryed the ignitionpin outs to coil ecu terminals 7 and 16 on plug 134.
the unit is working as for as the led is indicating the set rev limmit but will not cut the ignition.
so its pritty obvious the green wire is not correct all ideas welcome.
this is how its wired at the minute
red-posative ecu terminal 9-plug 136
black-earth ecu terminal 17 plug 134
yellow-tacho ecu ternimal 14 plug 135
white-hand brake switch (earth)
green-tryed cam shaft +/crank shaft +terminals 5 and 6 plug 136 and also tryed the ignitionpin outs to coil ecu terminals 7 and 16 on plug 134.
the unit is working as for as the led is indicating the set rev limmit but will not cut the ignition.
so its pritty obvious the green wire is not correct all ideas welcome.
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
03 November 2021 11:07 AM
supshon
General Technical
2
03 October 2015 08:06 PM