Down pipe Fitment sensors
#1
Down pipe Fitment sensors
Hi i have read on some threads previously that after fitting on a decat down pipe i would need a resister to knock off the CEL light. can anyone en-lighten me as to what resister this is and where i can get one thanks.
#4
There is no simple resistor fix for removing the downpipe cat......the ECU will register the loss of the cat and likely throw CEL P0420
The ECU is quite clever and expects to see a varying signal so will throw a cel as it thinks there is something wrong.
You can buy a CEL fix which attaches to the rear 02 sensor and is meant to feed the ECU the correct signal, some places sell a spacer which moves the 02 sensor away from the exhause flow which again is meant to fool the ECU (only ever seen these for sale in the USA) and finally you can have the ECU re-mapped so the CEL does not appear.
Re-mapping is the only one that is 100% guaranteed.......and makes the car go better LOL
HTH
Shaun
The ECU is quite clever and expects to see a varying signal so will throw a cel as it thinks there is something wrong.
You can buy a CEL fix which attaches to the rear 02 sensor and is meant to feed the ECU the correct signal, some places sell a spacer which moves the 02 sensor away from the exhause flow which again is meant to fool the ECU (only ever seen these for sale in the USA) and finally you can have the ECU re-mapped so the CEL does not appear.
Re-mapping is the only one that is 100% guaranteed.......and makes the car go better LOL
HTH
Shaun
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
KK3960
General Technical
3
07 October 2015 12:33 PM