Was fine yesterday when i parked it up, jumped in it today and its just not working at all.

All other dials are ok rev counter etc.

Its a 94/95 Classic Sti Ver2


Has anyone any ideas please.....

Many thanks in anticipation

 

You checked the cabling running from the clocks to the gearbox? Perhaps come loose or snapped internally? You had the clocks out recently?

 

Just took clocks out the cable HAS come out the clocks.


Previous owner had fitted white clocks so looks like its come loose.

Is there an easy way of getting it back in at all there is absolutely no give in the cable.


THANKS AGAIN

 

mine got pulled out the back of the clocks when i re-placed my down pipe, unfortunatly i dont think there an easy way getting it back in i shredded my hand doing it so good luck and hope you have small hands unlike me lol.

 

Yeah no slack really on the cable so be carefull you dont pull to hard and rip it from the g\box. Easiest way is to set the clocks in place and then remove the heater controls and try and get your arm in through there to push the cable in.

Done plenty white dials myself and now i know its just not worth the hassle!!!!!