Blown Gasket????
02 June 2008, 09:30 PM
#3
Scooby Regular
Thread Starter
Join Date: Aug 2006
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
hi mate, it's not blown as such the cylinder head has lifted and stretched the head bolts, the gases then escape into the waterway over the top and underneath the gasket, if you look at the top right head gasket you can see a burn mark near the water jacket area(outside the centre area of the gasket)
maybe someone else can give a better explanation!?
maybe someone else can give a better explanation!?
03 June 2008, 10:55 AM
#4
Scooby Regular
iTrader: (3)
Join Date: Aug 2003
Location: AL4 | W1B
Posts: 2,699
Likes: 0
Received 0 Likes
on
0 Posts
hi mate, it's not blown as such the cylinder head has lifted and stretched the head bolts, the gases then escape into the waterway over the top and underneath the gasket, if you look at the top right head gasket you can see a burn mark near the water jacket area(outside the centre area of the gasket)
maybe someone else can give a better explanation!?
maybe someone else can give a better explanation!?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post