Notices
General Technical
Sponsored by:
Sponsored by: CARiD

STI 8 Gearbox

Old May 8, 2008 | 11:24 AM
  #1  
RB5_203's Avatar
RB5_203
Thread Starter
Scooby Regular
 
Joined: Aug 2005
Posts: 188
Likes: 0
From: Essex
Default STI 8 Gearbox

Where is the best place in London/Essex for STI 8 gearbox rebuild? and what sort of price should i expect to pay?

At the moment it is only 4th into 5th gear syncro that is playing up and needs to be repaired but was thinking about doing the whole box while it was out!

Also what oil should be used in the box?

Thanks

Last edited by RB5_203; May 8, 2008 at 11:30 AM. Reason: adding something
Reply
Old May 8, 2008 | 11:51 AM
  #2  
jd5217's Avatar
jd5217
Scooby Regular
 
Joined: Feb 2005
Posts: 2,156
Likes: 1
From: over the hills and far away
Default

what did you do to damage it?

is it uk or jdm?
Reply
Old May 8, 2008 | 02:27 PM
  #3  
RB5_203's Avatar
RB5_203
Thread Starter
Scooby Regular
 
Joined: Aug 2005
Posts: 188
Likes: 0
From: Essex
Default

I am assuming its a uk spec gear box!

I damaged the 4th to 5th syncro playing with my friends FQ400!
Reply
Old May 8, 2008 | 03:22 PM
  #4  
jd5217's Avatar
jd5217
Scooby Regular
 
Joined: Feb 2005
Posts: 2,156
Likes: 1
From: over the hills and far away
Default

did you miss a gear then?

thought these were bulletproof.
Reply
Old May 8, 2008 | 05:03 PM
  #5  
RB5_203's Avatar
RB5_203
Thread Starter
Scooby Regular
 
Joined: Aug 2005
Posts: 188
Likes: 0
From: Essex
Default

Originally Posted by jd5217
did you miss a gear then?

thought these were bulletproof.

Yep totally my fault, started to reel him in and then got too excited when changing into 5th and let the clutch up too quick!!!!

Now 4th into 5th at high rev's won't go in without man footing the thing in there, so now I change into 6th then back down to 5th with the anti lag on

or I wait for the revs to drop below 2k and it goes in without a fuss!
Reply
Old May 8, 2008 | 05:39 PM
  #6  
Blacksimus's Avatar
Blacksimus
Scooby Regular
 
Joined: Apr 2008
Posts: 168
Likes: 0
From: Herts
Default

I had the gearbox from my evo IV rebuilt by Wimbledon Automatics in southwest London. It was a first for them but they done a brilliant job and was at a reasonable price.
Tel:02085407780
Reply
Old May 8, 2008 | 06:00 PM
  #7  
B0DSKI's Avatar
B0DSKI
Scooby Regular
iTrader: (17)
 
Joined: May 2004
Posts: 10,626
Likes: 1
From: Owner of BrCarDetailing
Default

Mocom Racing M8. Zak n Luke will sort u out a treat
Reply
Old May 8, 2008 | 06:48 PM
  #8  
RB5_203's Avatar
RB5_203
Thread Starter
Scooby Regular
 
Joined: Aug 2005
Posts: 188
Likes: 0
From: Essex
Default

thanks guys!

I heard Zak is a hard man to get hold of but i am persistent and in no rush!
Reply
Old May 8, 2008 | 07:44 PM
  #9  
B0DSKI's Avatar
B0DSKI
Scooby Regular
iTrader: (17)
 
Joined: May 2004
Posts: 10,626
Likes: 1
From: Owner of BrCarDetailing
Default

Leave him a message on the answer phone with a clear message and a daytime phone number M8, it may take a few days but he WILL get back to u
Reply
Old May 8, 2008 | 07:46 PM
  #10  
SSCJAY's Avatar
SSCJAY
Scooby Regular
 
Joined: Mar 2007
Posts: 539
Likes: 0
From: The right side of 30psi
Default

It's a common problem on the Uk 6 speed box due to the vast difference in gear ratio's from 4th to 5th.

The synchro ring cost about £20, but I would imagine youl'll get charged around 12-14 hours labour to take the box out change the synchro and put it all back together.
Reply
Old May 8, 2008 | 07:51 PM
  #11  
RB5_203's Avatar
RB5_203
Thread Starter
Scooby Regular
 
Joined: Aug 2005
Posts: 188
Likes: 0
From: Essex
Default

Originally Posted by SSCJAY
It's a common problem on the Uk 6 speed box due to the vast difference in gear ratio's from 4th to 5th.

The synchro ring cost about £20, but I would imagine youl'll get charged around 12-14 hours labour to take the box out change the synchro and put it all back together.
£20 sounds good, i will take the box out myself but taking apart and rebuilding is beyond me!

I will leave that part to the pro's

is replacing the syncro/setting it up a difficult job? how many hours do you think is required?

thanks
Reply
Old May 8, 2008 | 08:00 PM
  #12  
SSCJAY's Avatar
SSCJAY
Scooby Regular
 
Joined: Mar 2007
Posts: 539
Likes: 0
From: The right side of 30psi
Default

The sychro goes in a set position so does not need setting up, I'm not entirely sure of the time involved with the six speed, but I would say shouldn't take more than 5-6 hours to open the box up change and put back together.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
Nov 18, 2015 07:49 AM


Thread Tools
Search this Thread

All times are GMT +1. The time now is 05:08 AM.