Help with fault codes and AVC-R
#1
Help with fault codes and AVC-R
My car has been working progress for far too long and has not been started for a year an have made numerous changes include avcr and now I have these faults
The avcr is set correctly i think settigs
1 for purple wire inj monitor
4 for jap car
Arrow down for TPS
now when i have come to start the car i get the cel light with these faults 44 24 and 31, Has anyone seen this before
tps seems to be working right it shows 5.0 or so volts undepressed and 0.8 or so depressed
is the original boost control valve ment to stay conected even though its not used
is its possable it is one fault causing these three codes
any help appreciated
cheers Dan
The avcr is set correctly i think settigs
1 for purple wire inj monitor
4 for jap car
Arrow down for TPS
now when i have come to start the car i get the cel light with these faults 44 24 and 31, Has anyone seen this before
tps seems to be working right it shows 5.0 or so volts undepressed and 0.8 or so depressed
is the original boost control valve ment to stay conected even though its not used
is its possable it is one fault causing these three codes
any help appreciated
cheers Dan
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM