Power steering pipes
#1
Scooby Regular
Thread Starter
Join Date: Nov 2006
Location: Fermanagh/Tyrone
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Power steering pipes
One of my power steering pipes has 'exploded', covering the engine bay in P/S fluid. Does anyone make an aftermarket uprated kit, i.e. stainless steel braided etc? Or should I just see about getting fittings and piping from a local motorsport dealer and make my own...
#2
Hi
You can make up your own from fuel inj or samco hoses if you want a H/D set up.
think you have just been a little unlucky this time as std hoses are pretty good if not damaged
Regards Matt
You can make up your own from fuel inj or samco hoses if you want a H/D set up.
think you have just been a little unlucky this time as std hoses are pretty good if not damaged
Regards Matt
#3
Scooby Regular
iTrader: (2)
Standard kit should be fine as long as it's in good condition.
Do NOT try and bodge something together yourself especially on the pressurised feed side. The power steering fluid is highly flammable and is close to a hot turbo, headers etc. If you want an after market, uprated one take whats left of your original to a hydraulic shop and get them to make something up for you.
Do NOT try and bodge something together yourself especially on the pressurised feed side. The power steering fluid is highly flammable and is close to a hot turbo, headers etc. If you want an after market, uprated one take whats left of your original to a hydraulic shop and get them to make something up for you.
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM