as above dose anyone know where i can get a prova ecu remapped? thanks

 

anyone know anything about prova ecu?

 

As far as I am aware it is only a chip in the spare socket in the ecu (93~96 car?) and cannot be mapped.

You can have an ESL daughter board installed that is live mappable if you need/want it tuning

Simon

 

no its an ecu not just a chip.

 

The chip is inside the ECU
see Fitting Instructions

it will be mapped quite aggressive for UK fuel and to around 1.1bar, so I advise the use of high RON and octane boost.

some of the Prova ECU have the chip soldered direct to the board, so if you want to replace it with another chip or a live map ESL adaptor then it will probably be better to get a 2nd hand unit, as the chip will be a bitch to get out.

 

yeah i know but i think want J.G.M was saying is that prova only make chips to go in stander ecu and i was saying that i have a prova ecu and not a stander ecu with a chip in.
yeah boost is at about 1.2 bar. so can any1 set it up for uk fule? and maybe tweek afew more bhp? running 308bhp now was look for 350bhp

 

It's not a Prova ECU but a standard ECU with a Prova label on it and chip inside.
Your standard injectors and Map sensor will be running at their max at 1.2bar. So there isn't anything you can do to the ECU that won't involve changing other hardware on the car.

 

ok mate thanks. im running 308bhp and 276lbft in a 94 wrx. looking to get 330bhp and 300blft if pos. iv got full hks exhaust decat up rated full pump prova chip hks panel filter. got a fmic and k+n on the way. wot eles will i need?
440 injectors?
live mapping?

 

dont mean to keep going on about prova ecu but iv googled it and u can buy a prova sports ecu from japan!

 

for this year they put a chip in a standard ecu and sticker it up and send out etc...

Simon

 

ok mate cheers