Just had a simtek fitted on a 02 WRX... Thanks to Engine Tuner
06 February 2008, 06:45 PM
#1
Just had a simtek fitted on a 02 WRX... Thanks to Engine Tuner
Well what can i say the Simtek is in and has totally Transformed the car....
The difference is amazing, totally smooth power delivery and the drivability is great.
Anti lag is great.
the following power was obtained running 1.2Bar of Boost running only 97 Ron Fuel....
This is the low boost Setting.
The High Boost setting at 1.65 Bar made the following...
Obviously more power could have been achieved running 99 ron or a Methanol mix....
Myself and my Business partner who owns the car have to say a Big thanks to Alan & Martyn Jeffrey at Engine Tuner in Plymouth for the Great Job they have done...... Highly Recommended.
Spec:
93 CDB, Modified for STi 9 Crank.
STI 9 X Drilled crank
RCMS Omega Pistons +.25mm
Arrow Rods
ACL Race Series Shells
RCMS Modified oil Pump
1.1MM Cometic Head Gaskets
Heads Ported & Flowed
RCMS Headders
Full 3" Decat & HKS Exhaust System
Walbro Fuel Pump
Sard 650cc Injectors
FSE FPR
Inlet Manifold replaced with one from a WR1, doing away with the Tumble Generators
GRP N Clutch and Lightweight steel flywheel
RCMS Pulleys
Perrin Short Ram Induction kit
XS-Power FMIC
TD06 20G
The difference is amazing, totally smooth power delivery and the drivability is great.
Anti lag is great.
the following power was obtained running 1.2Bar of Boost running only 97 Ron Fuel....
This is the low boost Setting.
The High Boost setting at 1.65 Bar made the following...
Obviously more power could have been achieved running 99 ron or a Methanol mix....
Myself and my Business partner who owns the car have to say a Big thanks to Alan & Martyn Jeffrey at Engine Tuner in Plymouth for the Great Job they have done...... Highly Recommended.
Spec:
93 CDB, Modified for STi 9 Crank.
STI 9 X Drilled crank
RCMS Omega Pistons +.25mm
Arrow Rods
ACL Race Series Shells
RCMS Modified oil Pump
1.1MM Cometic Head Gaskets
Heads Ported & Flowed
RCMS Headders
Full 3" Decat & HKS Exhaust System
Walbro Fuel Pump
Sard 650cc Injectors
FSE FPR
Inlet Manifold replaced with one from a WR1, doing away with the Tumble Generators
GRP N Clutch and Lightweight steel flywheel
RCMS Pulleys
Perrin Short Ram Induction kit
XS-Power FMIC
TD06 20G
Last edited by Broxi; 06 February 2008 at 08:07 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM