erroe code 33, how can i fix ??
#1
erroe code 33, how can i fix ??
hi, keep getting ECL on and wont let me rev above 4500, i Ran the error code test and it came up with error code 33 , speed sensor ? its a 1993 subaru wrx, the speedo and everything else works as it should, any help much aprechiated, regards lester
#3
i checked underneath the car today and the speedo cable looks like its conected , thier is a little black box just before it connects to the gearbox, looks as i imagine it should and speedos etc all still work, regards lester
#5
thanks for the reply..
i forgot to mention that the car is an import so at some time has been converted to mph.. i take it the little black box could be a converter ? could this be the problem, although speedos are working correctly? regards lester
i forgot to mention that the car is an import so at some time has been converted to mph.. i take it the little black box could be a converter ? could this be the problem, although speedos are working correctly? regards lester
#6
Scooby Regular
Join Date: Jan 2007
Location: bradford
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
sorry mate the only think i can say now is take it to subaru, this is what the trouble code site says Vehicle speed sensor (VSS) or circuit, best of louk mate hope you get it sorted soon
#7
Scooby Regular
iTrader: (1)
Yea that box is the convertor.
If either, the speedo cable or the coverter box were at fault then the speedo itself would stop working, so if everything appears to work correctly then it has to be the small sensor in the head assay that's faulty.
The only other option is that there is a break in the wiring harness between the speedo head and Engine ECU, but this is highly unlikley!
The only cars to run a speedo cable & this type of sensor on the speedo are imports, so any secondhand replacment parts must also be from a pre 97 JDM car.
Phil
If either, the speedo cable or the coverter box were at fault then the speedo itself would stop working, so if everything appears to work correctly then it has to be the small sensor in the head assay that's faulty.
The only other option is that there is a break in the wiring harness between the speedo head and Engine ECU, but this is highly unlikley!
The only cars to run a speedo cable & this type of sensor on the speedo are imports, so any secondhand replacment parts must also be from a pre 97 JDM car.
Phil
Trending Topics
#10
no was defo 33 -- 3 long then 3 short ?
i was surprised as i expected to see knock sensor.. is the only way to get this sorted to get a whole new speedo or is the part sold seperatly ?
is thier anything else that i can check, looks secure from underneath the car will have to try and check the back of the speedo how ever i do that ? also the light only some times comes on, after a while or when i take it to/above 5000 revs after this it stays on and goes in to safe mode intill i d/c the batt for a couple of hours then is fine again for a while.....
regards...Lester
i was surprised as i expected to see knock sensor.. is the only way to get this sorted to get a whole new speedo or is the part sold seperatly ?
is thier anything else that i can check, looks secure from underneath the car will have to try and check the back of the speedo how ever i do that ? also the light only some times comes on, after a while or when i take it to/above 5000 revs after this it stays on and goes in to safe mode intill i d/c the batt for a couple of hours then is fine again for a while.....
regards...Lester
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM