Morgy

when tightening belt on alternator pwr steering and crank, is it possible to be too tight.

Normski

Yes, if it's too tight you'll knacker the bearings of the alternator/power steering.

CDF Racing

iTrader: (49)

Are they stock size pulleys you are fitting? If they are ,.. and your not sure how tight to do them you should notice a mark on the tensioners where they used to be - do them up to there and you can't go wrong ,..

If they are to tight you may not notice straight away but after a while you will get a nasty noice coming from the alternator


chris