Notices
General Technical
Sponsored by:
Sponsored by: CARiD

what does two beeps meen

Thread Tools
 
Search this Thread
 
Old Oct 3, 2007 | 12:09 AM
  #1  
gti00eater's Avatar
gti00eater
Thread Starter
Scooby Regular
 
Joined: Jun 2007
Posts: 304
Likes: 0
Default what does two beeps meen

was boosting hard in 5th then i heard two beeps and then i lost power slowed down was fine untill i floored it again then it beeped and cut the power again wot does this meen normaly its fine the car is boosting at 1.6bar should i turn the boost down ?? everything seems and looks fine with no strange noises etc
Reply
Old Oct 3, 2007 | 09:23 AM
  #2  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

HKS boost controller perchance? has a boost limit and a boost cut.. first beeps, second cuts boost.

Simon
Reply
Old Oct 3, 2007 | 10:01 AM
  #3  
Fuzz's Avatar
Fuzz
Scooby Regular
 
Joined: Jul 2002
Posts: 9,173
Likes: 0
From: Under your bonnet
Default

Well a standard car has nothing that beeps so as JGM says, must be some aftermarket boost controller or something.


Andy
Reply
Old Oct 3, 2007 | 08:09 PM
  #4  
gti00eater's Avatar
gti00eater
Thread Starter
Scooby Regular
 
Joined: Jun 2007
Posts: 304
Likes: 0
Default

the controler is over near the passanger footwell and the beeps came from around the speedo area i think it has never done this b4 and has been boosting at that from i got it around 4weeks
Reply
Old Oct 3, 2007 | 08:14 PM
  #5  
dan83590's Avatar
dan83590
Scooby Regular
 
Joined: Aug 2006
Posts: 3,214
Likes: 0
Default

1.6bar does seem very high! Is your car sorted to run that much?
Reply
Old Oct 4, 2007 | 08:48 AM
  #6  
gti00eater's Avatar
gti00eater
Thread Starter
Scooby Regular
 
Joined: Jun 2007
Posts: 304
Likes: 0
Default

i dont know but wen i bought it thats wot it was running was supost to be 380bhp i bought it from a dealer in england who had only just had it imported so its prob still maped for jap fuel i seen a post on reseting the ecu should i do this for running it on super?? wot would a safe boost to run at without taking to much away from the power? cheers
Reply
Old Oct 4, 2007 | 08:51 AM
  #7  
gti00eater's Avatar
gti00eater
Thread Starter
Scooby Regular
 
Joined: Jun 2007
Posts: 304
Likes: 0
Default

Originally Posted by Jolly Green Monster
HKS boost controller perchance? has a boost limit and a boost cut.. first beeps, second cuts boost.

Simon
yea mate its a hks maby the sound did come from it but i didnt sound like it if it was the controler wil it have caused any damage or is it just a safty thing? should i reset the controler to lower?
Reply
Old Oct 4, 2007 | 08:56 AM
  #8  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Default

resetting the ecu will erase all the learning it has done to try and compensate for the less ron fuel it is currently running on.. it needs setting up on uk fuel.

Simon
Reply
Old Oct 4, 2007 | 09:21 AM
  #9  
gti00eater's Avatar
gti00eater
Thread Starter
Scooby Regular
 
Joined: Jun 2007
Posts: 304
Likes: 0
Default

ok will leave it in to get looked at cheers
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
AlanG
Lighting and Other Electrical
3
Jan 4, 2002 02:14 PM
bennetm
Was it you?
3
Jul 7, 2001 09:53 AM
Mossman
ScoobyNet General
18
Jun 30, 2000 10:26 AM




All times are GMT +1. The time now is 07:01 AM.