how hard would this be for a first timer? or should i leave it in somewere? cheers also how well do these work?? thanks

 

if your going to get one get someone who knows what they are doing to fit it.
the results vary from car to car.

 

y get one of them my car does it nutarully no flamer required lol

 

wot would i need to make my car crack flames on its own its running 380+bhp and no sign!!!

 

At the very least you will need a full decat and a VTA dump valve

 

from your spec id be suprised

 

Surely for it to flame without a kit you would need a full de-cat?

 

mines fairly standard apart from tubular manifold and decat down pipe and a vta and it spits flames and backfires regularly

 

wot does vta stand for ?? to be honest i havent seen if it has a cat or not are they required to have cats in japan?? the exhaust its self is feckn huge tho its as fat as the tail pipe it would be prob 4" wot would the thicknes of a standard exhaust be? the very odd time id here it pop but its only if i feather the throttle wen decellerating id love it to pop more often will it only do it if the cat is removed?? cheers

 

Ra,s were not designed for flame kits....please dont do it.

Instead get yourself a decent ecu with antilag......if you want pops/bangs and flames you will not be dissapointed.

p.s what turbo are you using???

 

full 3 inch decat with a hks super drager backbox thats all i got

 

it has a zero sports turbo its quite a big turbo so i am told lol wot sort of money is anti lag is it easy fitted?? cheers my exhaust isnt the loudest for the size of it dont know wot make it is but it looks brand spanking there are 3 boxes is it likely that one of these are the cat?

 

No flamer kit here
<-----
or VTA dump valve. It's all in the mapping.

 

could i just map it to pop and flame safley dont fancy anti lag read up on them and they seem to cause more bother how much does it cost to remap a car??

 

i got a scooby ninja exhaust and a decat system and it spits flames at around 7k, bare in mind this is a impreza turbo 2000 with no mods to the engine apart from the above. and a simota racing panel filter.

 

Yes you can and prices vary. About £650 inc for Tek3 & license.

 

its quite easy to do u do need the decat and vta for best effect but it is a easy job

u need to drill a hole in you tail pipe about 3 - 4 inches form the end of the tail pipe make sure its big enough for the spark plug to screw through

u need to fit the ht lead in you boot there is a bung u can pull out and the the lead will go straight through.

u need to fit the coil in the car some where i just velcrowed mine to the floor of the boot.

on ur controller unit u need to just attach a live and neg to it obviously attatch the leive through a switch its a very easy job to do
hope this helps

dan

 

thanks mate sounds easy just like wireing a sound system sorta ill let you know how i get on thanks