Putting an Ecutek remap back to standard ?
#1
Scooby Regular
Thread Starter
Join Date: Jan 2003
Location: I'm still around in deepest Essex, now with a Fiesta ST-2
Posts: 3,024
Likes: 0
Received 0 Likes
on
0 Posts
Putting an Ecutek remap back to standard ?
I had my 03 WRX remapped by Pat , nothing too major just a centre decat and Prodrive backbox added , so a very similar setup to the PPP package . I am thinking of selling the car and thinking of turning it back to standard , Is there a simple way of reverting back to the standard map , or do I have to track down the Pat the mapper and get it remapped back ?
Thanks for any help
Dave
Thanks for any help
Dave
#2
Scooby Regular
iTrader: (2)
The std map has to be reloaded by an Ecutek mapper. Alternatively if you could source a cheap std ECU and swap that over. I managed to source an 03 WRX ECU for £25 and sold my mapped ECU on to claw some money back.
Swapping the ECU over requires the car keys to be recoded. This costs about £30 from a Subaru dealer or an Ecutek mapper.
Nick
Swapping the ECU over requires the car keys to be recoded. This costs about £30 from a Subaru dealer or an Ecutek mapper.
Nick
#5
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
If you can't track Pat down, which usually isn't difficult..
I can reload a standard map.. but as said you will lose the licence etc.
Depending on how long ago it was mapped Zak won't be able to read / write it
Simon
I can reload a standard map.. but as said you will lose the licence etc.
Depending on how long ago it was mapped Zak won't be able to read / write it
Simon
#6
Scooby Regular
Thread Starter
Join Date: Jan 2003
Location: I'm still around in deepest Essex, now with a Fiesta ST-2
Posts: 3,024
Likes: 0
Received 0 Likes
on
0 Posts
Dave
#7
Scooby Regular
Thread Starter
Join Date: Jan 2003
Location: I'm still around in deepest Essex, now with a Fiesta ST-2
Posts: 3,024
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
charlesr
Engine Management and ECU Remapping
7
26 September 2015 10:46 AM