Notices

rough running/injectors 740cc

Thread Tools
 
Search this Thread
 
Old 08 July 2007, 09:39 PM
  #1  
millwrx
Scooby Regular
Thread Starter
iTrader: (1)
 
millwrx's Avatar
 
Join Date: Dec 2005
Posts: 1,173
Likes: 0
Received 0 Likes on 0 Posts
Default rough running/injectors 740cc

just fitted some 740cc injectors to my 93/94 plate impreza,it now will not idle and runs rough under light throttle,revs up fine,i am guessing that i need to have my power fc adjusted as i had 440cc fitted before,i am booking jolly green monster to come and map it but didnt want to get him all the way to my place to find that i have a knackered set of injectors,guessing its running rough due to excess fuel being dumped into the cylinders due to them being alot bigger,car ran fine before even tho i have not had the power fc mapped to my car since i brought it,just been trying to get all the mods done before i had it mapped
Old 08 July 2007, 10:39 PM
  #2  
Tidgy
Scooby Regular
 
Tidgy's Avatar
 
Join Date: Sep 2004
Location: Notts
Posts: 23,118
Received 150 Likes on 115 Posts
Default

yeah it will def need mapping to run ok, y have you gone for huge injectors that size?
Old 08 July 2007, 11:48 PM
  #3  
millwrx
Scooby Regular
Thread Starter
iTrader: (1)
 
millwrx's Avatar
 
Join Date: Dec 2005
Posts: 1,173
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Tidgy
yeah it will def need mapping to run ok, y have you gone for huge injectors that size?
will be getting a 20g turbo as my last mod,and they were cheap,
Old 08 July 2007, 11:52 PM
  #4  
Tidgy
Scooby Regular
 
Tidgy's Avatar
 
Join Date: Sep 2004
Location: Notts
Posts: 23,118
Received 150 Likes on 115 Posts
Default

ahh righto, might have been better with 550's cos the 740's are gonna be way way to big and might suffer from slower responce times.

but none the less should think untill its mapped will be all over the place as far as fueling goes
Old 08 July 2007, 11:58 PM
  #5  
millwrx
Scooby Regular
Thread Starter
iTrader: (1)
 
millwrx's Avatar
 
Join Date: Dec 2005
Posts: 1,173
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Tidgy
ahh righto, might have been better with 550's cos the 740's are gonna be way way to big and might suffer from slower responce times.

but none the less should think untill its mapped will be all over the place as far as fueling goes
yer but at £100 i couldnt say no,lol,and so i have been told i wont need to run them anywhere near there max cycle,also they are surposed to go well with 20g fitments,have got jolly green monster coming to map it
Old 09 July 2007, 07:31 AM
  #6  
MartynJ
Scooby Regular
 
MartynJ's Avatar
 
Join Date: Jan 2006
Location: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Posts: 2,629
Received 3 Likes on 2 Posts
Default

Using the commander go to the injector scale setting and turn them down from 100% to around 65% , this will get you in the ball park for a minute..
Then stick to the speed limit till it's mapped and you will be fine...
Old 09 July 2007, 08:48 PM
  #7  
millwrx
Scooby Regular
Thread Starter
iTrader: (1)
 
millwrx's Avatar
 
Join Date: Dec 2005
Posts: 1,173
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MartynJ
Using the commander go to the injector scale setting and turn them down from 100% to around 65% , this will get you in the ball park for a minute..
Then stick to the speed limit till it's mapped and you will be fine...
tried that,100% down to 75% but it made it worse,guessing its the map that needs adjusting
Old 09 July 2007, 08:50 PM
  #8  
Scott.T@PolarPerformance
Scooby Regular
 
Scott.T@PolarPerformance's Avatar
 
Join Date: Apr 2007
Location: East Sussex - www.polarperformance.co.uk
Posts: 359
Likes: 0
Received 0 Likes on 0 Posts
Default

If there Venom 740cc injectors Simon aka Jolly will probably tell you to change them
Old 09 July 2007, 08:54 PM
  #9  
Slowboy Racing
Former Sponsor
 
Slowboy Racing's Avatar
 
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes on 0 Posts
Default

Either fit your old injectors back until it gets mapped, or get the mapped tweaked by some one who knows what they are doing.
Old 09 July 2007, 08:59 PM
  #10  
andy97
Scooby Regular
iTrader: (1)
 
andy97's Avatar
 
Join Date: Aug 2004
Location: Api 500+bhp MD321T @91dB Probably SN's longest owner of an Impreza Turbo
Posts: 6,296
Received 118 Likes on 103 Posts
Default

Ive got 740's with my 20g, but I think they are nismos. No problems with idle
Old 09 July 2007, 09:16 PM
  #11  
millwrx
Scooby Regular
Thread Starter
iTrader: (1)
 
millwrx's Avatar
 
Join Date: Dec 2005
Posts: 1,173
Likes: 0
Received 0 Likes on 0 Posts
Default

no they are nismos/apexi ones i think,think its just down to the set up/map of them on the power fc,have got simon coming to map it soon so that should clear it up,,
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Benji554
Wanted
3
14 June 2016 11:19 PM
s_tubb23
General Technical
4
14 October 2015 07:58 PM
Townsend94
Drivetrain
3
28 September 2015 04:20 PM
ossett2k2
Engine Management and ECU Remapping
12
17 September 2015 08:47 PM



Quick Reply: rough running/injectors 740cc



All times are GMT +1. The time now is 12:15 AM.