fuel pressure regulator
#1
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: in my own little world0to60@4.3
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
fuel pressure regulator
ive just got one of them pressure regs for my 96 wrx has any one have any ideas is how to fit them, are they easy to fit and is there any pics the reg i got did not have instuctions thanks kev
#2
Scooby Senior
Yep, you need one of these Carls Scooby Site ver.2
What's the reason for fitting it, has your mapper advised one, and will they be checking the fueling after you have fitted it?
I would do the parallel fuel rail mod whilst your fitting it
Do a search for 'parallel fuel rail'
What's the reason for fitting it, has your mapper advised one, and will they be checking the fueling after you have fitted it?
I would do the parallel fuel rail mod whilst your fitting it
Do a search for 'parallel fuel rail'
#3
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: in my own little world0to60@4.3
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
ive just had my car mapped by andy f and he advised me if i want more power ill need to upgrade my turbo tdo4 for the tdo5 (have done) a bigger intercooler so ive perchased a front mounted one as well as a walbro fuel pump and pressure reg which i need to put them on the car first then get it re maped. but when i floor it (foot flat down) it feels as though fuel is struggling to get through, hicking so i asume i need to fit the fuel pump and reg? im i right or wrong
#4
Scooby Senior
you should fit everything and get it mapped straight away. The map won't be right for the TD05, and will cause all sorts of fueling issues, it may be destroying your engine.
drive off boost or swap the turbo back to the TD04, then put everything on just before you have it re-mapped
drive off boost or swap the turbo back to the TD04, then put everything on just before you have it re-mapped
#5
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: in my own little world0to60@4.3
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
thanks for that matey tdo5 is not on yet ill fit that before i go and get it mapped. were abouts on the engine do i look for to fit the pressure reg
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM