one for the mappers, prob with fuel map
#1
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: "Speed has never killed anyone, suddenly becoming stationary...Now that's what gets you."
Posts: 729
Likes: 0
Received 0 Likes
on
0 Posts
one for the mappers, prob with fuel map
i am having a few probs since i have added a 20g and 550's along with a couple of other little things
ok here we go... i cant seem get the afr reading on datalogit to read the same as my lm1,
lets keep this simple! lets say if i set my whole fuel map to 14.0 i should see 14.0 on my wideband, but i dont! i see 9.0
my injectors are running at 80% i have played around with settings on this but 80 appears to be the correct level.
so what i was thinking is that i my need to rescale my maf settings??
i thought i might aswell post this on here as i have a few days intill i can work on it again! (to bloody busy) and i know we have some very good mappers on here and they may wish to help me alittle
i have a couple of things to try yet, but if someone knows of a simple fix that would be great.
thanks
mark
ok here we go... i cant seem get the afr reading on datalogit to read the same as my lm1,
lets keep this simple! lets say if i set my whole fuel map to 14.0 i should see 14.0 on my wideband, but i dont! i see 9.0
my injectors are running at 80% i have played around with settings on this but 80 appears to be the correct level.
so what i was thinking is that i my need to rescale my maf settings??
i thought i might aswell post this on here as i have a few days intill i can work on it again! (to bloody busy) and i know we have some very good mappers on here and they may wish to help me alittle
i have a couple of things to try yet, but if someone knows of a simple fix that would be great.
thanks
mark
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM