Intercooler??
#7
Scooby Regular
Join Date: Aug 2006
Location: ESSEX ...BORN AND BRED PETROL HEAD....................... MANS BEST FRIEND IS A ENGLISH BULL TERRIER
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
HAVE YOU SEEN THE FRONT MOUNT GROUP BUY £189. DELIVERD + £73 FOR A APEXI INDUCTION KIT DEPENDING WHAT YOUR GOING TO BY YOUR TOP MOUNT FOR THEY WORK OUT ABOUT THE SAME PRICE AT THE END
FORNT MOUNT GROUP BUY WILL BE GETTING THEIRS IN 6 WEEKS TIME TO SAVE UP
ALL THE INFO YOU WILL NEED IS ON THE GROUPE BUY I SHOULD KNOW IM RUNNING IT
KIP
FORNT MOUNT GROUP BUY WILL BE GETTING THEIRS IN 6 WEEKS TIME TO SAVE UP
ALL THE INFO YOU WILL NEED IS ON THE GROUPE BUY I SHOULD KNOW IM RUNNING IT
KIP
Trending Topics
#8
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Probs....
Watch out for front mount related problems.
Nobody tells you that you can get horrible dump valve related problems, not only with a cheap kit. I paid STUPID money for a seriously large 'cooler, got the car re-mapped and it was superb to drive flat-out, but lift off and the car really hesitated. Like a boost cut in severity, NOT NICE....
Fixed mine by stripping the dump valve and fitting the weakest spring I could find.... that doesn't leak under boost, that's another THEY don't tell you about.
For sensible power increases you need an STI 7/8 'cooler with it's plumbing, it is the high flow pipe-work that really helps with performance, not just the bigger 'cooler.
The Aussie sites have loads of info, but PM me if you'd like to find one....
Dunx
Nobody tells you that you can get horrible dump valve related problems, not only with a cheap kit. I paid STUPID money for a seriously large 'cooler, got the car re-mapped and it was superb to drive flat-out, but lift off and the car really hesitated. Like a boost cut in severity, NOT NICE....
Fixed mine by stripping the dump valve and fitting the weakest spring I could find.... that doesn't leak under boost, that's another THEY don't tell you about.
For sensible power increases you need an STI 7/8 'cooler with it's plumbing, it is the high flow pipe-work that really helps with performance, not just the bigger 'cooler.
The Aussie sites have loads of info, but PM me if you'd like to find one....
Dunx
Last edited by dunx; 13 March 2007 at 08:50 PM. Reason: Spulling
Thread
Thread Starter
Forum
Replies
Last Post
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM