I'M SUCH AN IDIOT!
#1
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: Bordon, Hampshire
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
I'M SUCH AN IDIOT!
I stupidly let my friends young son wash my WRX with me, unfortunately I wasn't paying much attention until I finished, and realised he was using the rough pad I had for the wheels on the bodywork! In the sun you can now see tons of light scratches! Will this buff off if I polish it?
#3
Scooby Regular
iTrader: (4)
hmmm
'friends young son' you sure lol
Anyway, you'll need some decent cutting compound to remove the scratches, then polish it, then wax it.
Just get some 'off the shelf' scratch remover from autoglym or something, it will be less dangerous then trade stuff for an amateur to use.
'friends young son' you sure lol
Anyway, you'll need some decent cutting compound to remove the scratches, then polish it, then wax it.
Just get some 'off the shelf' scratch remover from autoglym or something, it will be less dangerous then trade stuff for an amateur to use.
#5
either use t cut or if you can get soem use farecla g3 cutting compound this is what is used when using a buffer, and if you have a buffer use that but be very careful not to buff through, if not get either of the above and some mutton cloth and use some elbow grease, then use soem decent wax or polish to insulate your paint work, hope all goes well matey
#6
i would proberly use g10 as it is finer do it buy hand then polish should be alright if it was me i would take it to a valiter and get them to mop whole car it bring spaint work right up and looks the nuts depends how much you want to spend shouldnt be a lot any way
Last edited by seanie boy; 05 March 2007 at 10:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post