92typeRA

right ive been haveing boost probs so i thought i would check all the pipes ect.

took the airbox and piping so i could get a good look. from what i can see theses 2 pipes on my boost solinoid dont seem to attach to anything the 1 at the top and the 1 underneath

[img=http://img251.imageshack.us/img251/8002/pic216ft6.th.jpg]

[img=http://img355.imageshack.us/img355/4357/pic217yh6.th.jpg]

2.. are these 2 pipes ment to be connected hear

[img=http://img355.imageshack.us/img355/3963/pic218wv3.th.jpg]

and hear

[img=http://img251.imageshack.us/img251/4490/pic219lz7.th.jpg]

the car did have an aftermarket BOV and i have took this off now.
have the 2 pipes from the boost solanoid been disconeted and replaced with the blue piping for some reson and iff so do i just take it off and put the boost pipes back on . iff not where should these go

hope this make some sence

500

Yep they do

1st to the top amd 2nd to the bottom iirc

Take it you had 0.7 bar boost before?

92typeRA

so i can take the blue pipeing off and burn it and just attach the normal 1s from the boost solanoid back in .no 0.4 bar at least thats a start will look at other pipe for cracks ect

cheers mate

KIPS

Looks like you may of been running a closed loop cucit one of the techies will confirm this
KIP

92typeRA

what dose that mean and do

can a techies please help

500

Closed loop/open loop is to do with the ECU using the lambda to control the fueling

Yep , just attach the pipes to the solenoid and let the ECU control boost

If the car hasnt been mapped for UK fuel, ONLY use optimax with octane booster unless you have a knocklink to monitor knock/det

92typeRA

so with these to pipes not attached could this be why its only boosting to 0.4 and will i reset my ecu when i put them back on

cheers buddy

500

Yes and yes

92typeRA

sweet cheers buddy

92typeRA

thanks alot ppl boost back to 0.9 and pulling harder than ever

Claaarkio

iTrader: (1)

excellent!

got there in the end mate

92typeRA

yeh i was going to start smashing my head off the walls

now time to go get some v-power lol

Claaarkio

iTrader: (1)

Nice to have it running correctly hey!! now my knock sensor is sorted i can drive mine again too!! good fun!!!