scooby51

Was looking for some advice on increasing the power and torque in my car

My car is a PPP'd WRX (51) and running 265 at the mo.

Would it be a case of a simple remap or would there be more to it???

Also, with the PPP, would the ECU be open or closed license????

Lets have some of your ideas folks

Cheers

Dave

bighead

iTrader: (1)

it depends on how much power yr after and how deep is yr pockets !

scooby51

just a little tweak to around 300 ish and quite deep

Brun

A little tweak won't get 300 as your turbo simply can't flow enough. Personally i would get a new turbo and injectors. You only have 380's IIRC

scooby51

what size injectors should i go for then, somewhere in the 400's??

Cheers for your replys

D

Brun

My Classic has 440's as std which i believe are good for mid to high 300's so i assume your 380's will do the trick upto 320ish (i'm only guessing here). If you are only looking to crack 300 then you might as well stick with what you've got. If your powere aspirations are higher i would go for 550's to leave yourself plenty of scope for future tuning

scooby51

sounds like a good plan Brun

Thank you

Dave

scooby51

anyone advise me on the ECU???

Is it open or closed??

Brun

Open / closed?????
I would sell your ecu to someone with a std wrx in a cash + their ecu deal then get that mapped

Rob2101

Think your ECU will be open as it gets a remap with the ppp kit.

But don't hold me to that.

scooby51

cheers rob2101