Question on TGVs ... again sorry!
#1
Scooby Regular
Thread Starter
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
Question on TGVs ... again sorry!
I have a spare complete Inlet manifold inc tgvs, fittings & coil packs sitting in my garage.
After doing a search and trying to understand the benifits of the TGV delete, removing the inlet to paint and the green brackets etc is it worth the hassle to have a nice clean engine bay....... to me yes!!
So with the spare lot sitting about, should I send the TGV part away to have them deleted (not on a remapp yet) if so, who does it and at what charge?
the next question is I bought a fuel rail off this auction site, "SAGE Performance" one which is supposed to be the same as the MRT one, maybe given the wrong info off other sites, can I fit this with a set of pink injectors and fit everything all over (inc VF34/35 not sure which one yet) at the same time before the remapp?
Thanks for your help,
S!
After doing a search and trying to understand the benifits of the TGV delete, removing the inlet to paint and the green brackets etc is it worth the hassle to have a nice clean engine bay....... to me yes!!
So with the spare lot sitting about, should I send the TGV part away to have them deleted (not on a remapp yet) if so, who does it and at what charge?
the next question is I bought a fuel rail off this auction site, "SAGE Performance" one which is supposed to be the same as the MRT one, maybe given the wrong info off other sites, can I fit this with a set of pink injectors and fit everything all over (inc VF34/35 not sure which one yet) at the same time before the remapp?
Thanks for your help,
S!
#3
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
how do you plan to "delete"
if your planning on totally removing you will have to do something about the cel light, and I can't remember any mapper saying they can remove this, most people i talk to think it can be done but not sure
you could always cable tie the motors somewhere else if it was a problem
im not sure how much they are going to charge you for the work but might be worth noteing a jdm manifold ( no tgv) is £200 + vat and comes in that STI red
if your planning on totally removing you will have to do something about the cel light, and I can't remember any mapper saying they can remove this, most people i talk to think it can be done but not sure
you could always cable tie the motors somewhere else if it was a problem
im not sure how much they are going to charge you for the work but might be worth noteing a jdm manifold ( no tgv) is £200 + vat and comes in that STI red
Last edited by WRX_Rich; 31 January 2007 at 05:52 PM.
#4
Scooby Regular
iTrader: (2)
My TGV delete CELs were removed with an Ecutek remap.
As Rich says, its probably cheaper to buy (IRO £120) a JDM STi or Spec manifold than get than have the work done.
Saying that, I'm not aware of anyone even doing the work in the UK as TGV deletes don't seem to have caught on - unlike the US.
nick
As Rich says, its probably cheaper to buy (IRO £120) a JDM STi or Spec manifold than get than have the work done.
Saying that, I'm not aware of anyone even doing the work in the UK as TGV deletes don't seem to have caught on - unlike the US.
nick
Trending Topics
#9
Scooby Regular
Join Date: Jul 2006
Location: huddersfield
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
purge valve
evening! can anyone tell me why my purge valve is clicking very loudley after say 20 seconds on tick over? and when reved it gose away but back on again after another 20 seconds and so on.seams strange and seams to started since re map
cheers.
ooooooooooops done it wrong...............
cheers.
ooooooooooops done it wrong...............
Last edited by andyxros; 04 March 2008 at 06:17 PM. Reason: wrong place
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM