Injector Advice!
Jan 17, 2007 | 07:21 PM
Thread Starter
Joined: Jun 2006
Posts: 124
Likes: 0
Injector Advice!
WRX with TD05-18G, full 3" system, K&N, tubular manifold and larger intercooler! 550cc or 650cc injectors?
Jan 17, 2007 | 08:12 PM
Joined: Oct 2006
Posts: 1,150
Likes: 0
From: 8.95 @ 168mph. Zero to 1KM 194.1mph
550's should be more than enough for an 18G, but what year WRX ?
Mark.
Jan 17, 2007 | 08:49 PM
Thread Starter
Joined: Jun 2006
Posts: 124
Likes: 0
Jan 17, 2007 | 09:08 PM
Joined: Jun 2006
Posts: 8,089
Likes: 0
From: Edinburgh (ish)
Does it definitely need new injectors with those mods ?
Jan 17, 2007 | 09:30 PM
Joined: Feb 2004
Posts: 11,583
Likes: 4
Yes it does
.......STi pink injectors will be OK (535 / 550 depending on who you ask LOL)
Shaun
Jan 18, 2007 | 02:14 AM
Joined: Oct 2006
Posts: 1,150
Likes: 0
From: 8.95 @ 168mph. Zero to 1KM 194.1mph
Sti Pinks make about 505cc at 3 bar, and 550cc at 3.5 bar fuel pressure.
They should be fine for an 18G. Worst case you'll need to up the fuel pressure, which would require an adjustable fuel regulator if you don't already have one.
Mark.
Jan 18, 2007 | 08:47 AM
Thread Starter
Joined: Jun 2006
Posts: 124
Likes: 0
What are the advantages/disadvantages of going with the bigger injectors?
Jan 18, 2007 | 02:41 PM
Joined: Feb 2004
Posts: 11,583
Likes: 4
There are no disadvantages in going for the bigger injectors apart from the cost of them.......your WRX injectors will be maxed out !!
Midlife.....
Jan 18, 2007 | 04:15 PM
Thread Starter
Joined: Jun 2006
Posts: 124
Likes: 0
Do you mean bigger as in the 650's or 550's?
Jan 18, 2007 | 06:45 PM
Joined: Mar 2004
Posts: 4,088
Likes: 0
From: N.Ireland
sti v7 injectors rated at 550cc at 3.5 bar will be fine.
I have seen a few sets go on here for about £200
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
just me
Non Scooby Related
26
Jan 3, 2020 11:12 AM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
Mister:E
ScoobyNet General
0
Sep 28, 2015 07:46 PM
hedgecutter
General Technical
3
Sep 25, 2015 02:35 PM