is it safe !
05 January 2007, 10:17 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2006
Location: halesworth, suffolk
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
is it safe !
i have a 95 wrx import, it's blown at the mo but when it's fixed it'll have:
sti block
turbo back straight through zorst
green filter
if i buy an Apexi boost controler and up the boost to 1.1 bar will i kill my engine???
sti block
turbo back straight through zorst
green filter
if i buy an Apexi boost controler and up the boost to 1.1 bar will i kill my engine???
06 January 2007, 03:28 PM
#3
i would presume if you monitor the fuelling and afr it would be fine.
Are you going to uprate the fuel pump (possibly the fuel pressure regulator)?
Worth checking www.enduringsolutions.com for their chip as it changes the boost pressure to 1.1bar.
Are you going to uprate the fuel pump (possibly the fuel pressure regulator)?
Worth checking www.enduringsolutions.com for their chip as it changes the boost pressure to 1.1bar.
06 January 2007, 04:26 PM
#5
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
fuel pump will be a good addition anyway especially if you come to add further mods at a later point.
Can only compare with my previous UK97 which happily ran 1.1 boost with a TD05 for a year or so. Later added a FPR along with an Apexi ecu mapped by Andy F and raised the boost again to 1.4. No issues running like this for two years and I know the car is still running strong.
Had knocklink and Llambdalink to monitor things
Can only compare with my previous UK97 which happily ran 1.1 boost with a TD05 for a year or so. Later added a FPR along with an Apexi ecu mapped by Andy F and raised the boost again to 1.4. No issues running like this for two years and I know the car is still running strong.
Had knocklink and Llambdalink to monitor things
Thread
Thread Starter
Forum
Replies
Last Post
charlesr
Engine Management and ECU Remapping
7
26 September 2015 10:46 AM