so far on my 95 wrx i have an exhaust system and k&n filter, im not looking for crazy power but just wondering what you would reccomend next.

i was thinking of fitting a bigger intercooler from a later scoob, im not sure whats best so if anyone has a guide that would be great.
i was also gonna fit a chip, something like scooby chip?

any advice would be appreciated

 

not done this myself but there are quite a few threads on here re fitting larger intercoolers to the earlier models including fitment of the STi intercoolers from a V7 onwards.
Fitting a WRX intercooler from a new age would be a worthwhile upgrade and much cheaper than the STi route.
Do a search and all will be revealed

 

Are classic sti intercoolers better than uk classic ones?

 

Front Mount intercoolers are really affordable these days, have you not considered one of these. They are now around £195 delivered.

Craig

 

Dont like the idea of cutting my car to fit it

 

I agree, I've gone for an STI 03 intercooler, it wasn't too hard to fit to MY99, i think it is a bit harder to fit to a MY95, have a look in the projects section as someone may have already done it.

Damo

 

read the article in this monthy Jap Performance magazine, it's a really good article and should answer a lot of your questions, they have basically done a number of runs on a dyno to see which is best so what they say is fully backed up...

 

As someone else has already stated the test was done at Scoobyclinic, using an intercooler they sell, on their dyno for a magazine they advertise in!

Call me cynical if you like.

Also the Type 25 runs 415 bhp through the STI top mount, if it works on a car like that it's fine for me.

Also for non crazy power cars the increase in lag from a front mount may not be beneficial.

Damo

 

THIS SHOULD SORT YOU OUT
https://www.scoobynet.com/projects-4...0-classic.html

kips

ps may have one for sale

 

Thats the exact project I followed to fit mine, it made it so easy!

Damo

 

well im planning on fitting an intercooler from a face lift.
seen a few projects of front mount, dont fancy cutting up me car.

so with these mods would i need a remapable ecu or will a chip do?

exhaust
k&n filter
version 3/4 intercooler
also going to de cat but want to be able to pass MOT

 

well ive fitted a version 5/6 wrx intercooler with sti y pipe and its gave exellent results.
apart from it pulling better (did have a boot leak)
it has a much louder induction note and you can really hear the turbo spinning up.
wasnt really expecting any changes in sound but im very pleased with results for the price i paid.

this is the guide i used
https://www.scoobynet.com/projects-4...er+fitting+wrx

 

im just about to fit an sti v3 type ra one to my 95uk classic.

but im going to change a couple of thing by having them alloy weldered.
i just need to find out about these brackets, what i need to do to change them

but i'll be selling my sti v2 intercooler after.