Whats the best Newage RCM Induction Kit for 400HP
#1
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jul 2005
Location: North West
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
Whats the best Newage RCM Induction Kit for 400HP
Peeps with RCM induction kits, please can you advise what power Circa the 400HP mark you are running and what size cone you have fitted.
Cheers
Cheers
#2
Scooby Regular
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
if in standard inlet position, then 80mm with either 160mm cone or 210mm cone.
If rotated turbo then 100mm trumpet and either of those cones again.
If rotated turbo then 100mm trumpet and either of those cones again.
#7
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
mines the 80 mm not sure on cone size running 386bhp on scoobyclinic rollers
you need to fit just before the remap ( as in don't drive the car ) .. why are you thinking your aps job is not up for the job?
are you trying to get into 400bhp then, its not easy
you need to fit just before the remap ( as in don't drive the car ) .. why are you thinking your aps job is not up for the job?
are you trying to get into 400bhp then, its not easy
Trending Topics
#9
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jul 2005
Location: North West
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
Last RR i made 370HP and have just fitted 650's, APS 3.5" system and a bigger IC. Martin Ninnybobbs has a virtually similar spec on his car and has made 396BHP on the same rollers so im in spitting distance of the 400 i would have thought on these rollers! Car felt immediately quicker once the headers were fitted!
Havent drove it since the injectors and IC have been fitted though as waiting for Andy F to tweak map me in October! So its fingers crossed.
Not sure if the APS CAIK will take me to the magic 400HP level though?? Anyone made 400+ with one of these? if not whats my alternative?
Cheers
Havent drove it since the injectors and IC have been fitted though as waiting for Andy F to tweak map me in October! So its fingers crossed.
Not sure if the APS CAIK will take me to the magic 400HP level though?? Anyone made 400+ with one of these? if not whats my alternative?
Cheers
Last edited by KK3960; 04 September 2006 at 06:22 PM.
#10
Scooby Regular
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
id say it will flow enough, but it will be near its limit....just try it i guess....
which rollers are we talking about?
which rollers are we talking about?
#11
Scooby Regular
Join Date: Nov 2005
Location: manchester
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
prosport you will p*ss it kriss you need 30 bhp from gt spec headers 650 sards (the right colour ) personal joke hyperflow intercooer , and andy f with your 20g should do it no problem
#13
Ecu Specialist
On a new age the APS has the same intake bore as OEM, so its a restriction, the GC8 version was bigger at 80mm and that I rate "just" a 400 bhp intake system, neils car is a 2.5 liter btw, the RCM 80mm cone and smaller filter is good to 500 ish.
cheers
bob
cheers
bob
#15
Scooby Regular
Join Date: Jul 2003
Location: Behind the wheel of a Time Attack R33 GTR
Posts: 5,734
Likes: 0
Received 0 Likes
on
0 Posts
Hi andy, graph (of sorts) posted here......
https://www.scoobynet.com/ecutek-pow...s-t541681.html
its fine, much better to drive than before.
https://www.scoobynet.com/ecutek-pow...s-t541681.html
its fine, much better to drive than before.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM