Notices
General Technical
Sponsored by:
Sponsored by: CARiD

maximum boost?

Thread Tools
 
Search this Thread
 
Old Sep 2, 2006 | 05:56 PM
  #1  
maccy's Avatar
maccy
Thread Starter
Scooby Regular
 
Joined: Aug 2006
Posts: 54
Likes: 0
From: west bromwich
Default maximum boost?

Just fitted a boost gauge to my 95 impreza wrx (jap). Getting a boost of 0.7bar out of it at the moment and was just wondering whats the safe maximum boost you can set the car up for?

Also what boost level is the factory ecu mapped to?
Reply
Old Sep 2, 2006 | 06:55 PM
  #2  
miltski's Avatar
miltski
Scooby Regular
 
Joined: Jun 2006
Posts: 402
Likes: 0
From: scumstead
Default

without something like a fuel cut defender there's only so much boost the car can take before fuel cut out anyway, i think close to 1bar. hope that helps
Reply
Old Sep 2, 2006 | 07:19 PM
  #3  
maccy's Avatar
maccy
Thread Starter
Scooby Regular
 
Joined: Aug 2006
Posts: 54
Likes: 0
From: west bromwich
Default

cool, so the boost cut is set to 1bar
anyone else have an idea on the ecu boost mapping and the safe boost level for a stock car?
thanks
Reply
Old Sep 2, 2006 | 08:48 PM
  #4  
RedScoob's Avatar
RedScoob
Scooby Regular
 
Joined: Nov 2005
Posts: 969
Likes: 0
Default

Stock boost should be 0.9 bar... Any less and it's best to find out the cause before you start increasing the boost by other means. It's possible you have a leak.
Reply
Old Sep 3, 2006 | 11:23 AM
  #5  
maccy's Avatar
maccy
Thread Starter
Scooby Regular
 
Joined: Aug 2006
Posts: 54
Likes: 0
From: west bromwich
Default

well before the boost gauge was put on. the pipe that you need to connect to the boost gauge and the manifold, well there was already one on there. It was connected to the manifold but led to noithing as there wasnt a boost gauge on before so dont know

so if 0.9bar is the stock what is the max?
Reply
Old Sep 3, 2006 | 07:17 PM
  #6  
dazzla's Avatar
dazzla
BANNED
 
Joined: May 2006
Posts: 27
Likes: 0
Default Boost max

I am running a 2000 wagon uk with Prodrive Performance Pack on and it boosts at 1.1 max.
Reply
Old Sep 3, 2006 | 07:33 PM
  #7  
T5OLF's Avatar
T5OLF
Scooby Regular
iTrader: (4)
 
Joined: Sep 2005
Posts: 3,311
Likes: 0
From: The yorkshire dales - best roads in the UK
Default

You can only turn the boost up till it hits the fuel cut. But you need alter the fueling etc you can't just screw the boost up to much. I run at 1.4 bar using AVC-R and Apexi ecu.
Reply
Old Sep 3, 2006 | 07:52 PM
  #8  
ImprezARex's Avatar
ImprezARex
Scooby Regular
 
Joined: Jun 2006
Posts: 105
Likes: 0
Default

the TD05 turbo fitted as standard to your car will run 1.4bar max but you might be better off fitting a apexi power fc ecu to make sure your fuelling and ignition are correct then start upping the boost. bleed valves like a daws can cause your engine to run lean
Reply
Old Sep 3, 2006 | 09:10 PM
  #9  
Scott.T's Avatar
Scott.T
Scooby Regular
iTrader: (2)
 
Joined: Feb 2000
Posts: 6,181
Likes: 1
From: East Sussex
Default

Are you sure the boost gauge is fitted correctly as 0.7bar is actuator cracking pressure, not actual boost pressure which should be 0.875bar on a 95 WRX . If it's connected to the wrong side of the boost circuit you will be reading incorrectley.
Reply
Old Sep 4, 2006 | 06:34 PM
  #10  
maccy's Avatar
maccy
Thread Starter
Scooby Regular
 
Joined: Aug 2006
Posts: 54
Likes: 0
From: west bromwich
Default

it is definately fitted correctly. Got my boyfriend to fit it for me and he has fitted loads before
Reply
Old Jan 4, 2007 | 06:32 PM
  #11  
WRXMATT's Avatar
WRXMATT
Scooby Regular
 
Joined: Aug 2002
Posts: 319
Likes: 0
From: Northamptonshire
Default

MY93 WRX is standard and goes to 1.1-1.2 bar
Reply
Old Jan 4, 2007 | 06:36 PM
  #12  
myblackwrx's Avatar
myblackwrx
Scooby Regular
iTrader: (1)
 
Joined: Mar 2006
Posts: 8,787
Likes: 1
From: Dorset
Default

wrxmatt your car isn't standard running that boost i'd expect your ecu may have been chipped
Reply
Old Jan 5, 2007 | 10:06 AM
  #13  
Claaarkio's Avatar
Claaarkio
Scooby Regular
iTrader: (1)
 
Joined: Apr 2002
Posts: 1,095
Likes: 0
Default

Originally Posted by WRXMATT
MY93 WRX is standard and goes to 1.1-1.2 bar
93WRX std boost as said before is 0.75 - 11.47psi if i remember correctly

Dave
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
psport
Subaru Parts
3
Oct 4, 2015 07:35 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
mistermexican
General Technical
2
Oct 1, 2015 04:30 PM
Pro-Line Motorsport
Car Parts For Sale
2
Sep 29, 2015 07:36 PM
tjapplejuice
Drivetrain
9
Sep 25, 2015 03:46 PM




All times are GMT +1. The time now is 08:06 AM.