i i have a flamer kit on my waggon full decat and hks system.ecu remap / bigger fuel pump.and still carnt get it to flame any 1 no y???

 

get a VTA dump valve

 

Have you tridd it at the local McDs.... those type of things normal work a treat there

Tony.

PS Seriously if it's not working you may as well bin it.

 

whats a vta dump valve??

 

Vent To Atmosphire ie ones that "Psssssst"

 

thats another problem then as i have tried 3 different ones and my car just will not idle right

 

why will a vta dump valve make a diffrance ????

 

It won't make the flammer kit work, but as the VTA valve makes the car run a touch rich for a second when you lift off the throttle it can make the car pop and bang as the fuel burns on the exhaust..... and if the exhaust is nice and hot get a flame or too.

Tony.

 

AIr leak Had it with mine, ok when cold its fine but whe warm it drops to nearly stalling and power steering and aircon make it drop lots too!

Problem solved by replacing hoses with silicone ones and re-doing all connections and placing a bung in my induction pipework
Im not saying it will work, but you never know!

 

increase the gap on the spark plug (so theres more of an area to spark) it should do the trick mate.

Got a flamer kit on my classic (full decat) and get flames with or without a VTA dump valve. Like it without the Pssstttttt - more natural flames and only come out when you boot it.

 

do you know which make the full decat is and what did you pay

cheers phil

 

can someone tell me how this works......

does it stall the engine?

 

I've got a 2.5" H&S downpipe (wrapped) - £120 from a P1 owner @ Japfest and decat centre - £60 from SN forums, together with a Scoobyworld Ninja BB - £199. Plus the SCC Flamer kit - £50 :-)


its basically a spark plug in your exhaust tail pipe which ignites the unburnt fuel from your engine.