Delimiter Fitting
Worst picture ever hosted but....

I assume this fits gearbox side ? Has anyone ever fitted on of these ? I have found it very difficult to reach down past the master cylinder to get to the gearbox end of the speedo cable, even trying to come upwards from underneath the car. Any tips ?

I assume this fits gearbox side ? Has anyone ever fitted on of these ? I have found it very difficult to reach down past the master cylinder to get to the gearbox end of the speedo cable, even trying to come upwards from underneath the car. Any tips ?
Last edited by 94impreza; Aug 2, 2006 at 07:50 AM.
It's a behind the dials unit.
I just fitted one to a 97 sti dead easy remove the guage cluster no need to remove the harness, just pull it forward reach behind and remove the speedo cable push the adapter on the back of the guage cluster (its very tight and I wiggled clockwise/anticlockwise as I pushed it on so it seated properly) reattach the speedo cable.
A 15min job.
Jon
I just fitted one to a 97 sti dead easy remove the guage cluster no need to remove the harness, just pull it forward reach behind and remove the speedo cable push the adapter on the back of the guage cluster (its very tight and I wiggled clockwise/anticlockwise as I pushed it on so it seated properly) reattach the speedo cable.
A 15min job.
Jon
Last edited by stluciascooby; Aug 3, 2006 at 01:50 AM.
Trending Topics
Thanks for the advice finally got the time to do this today. Its fiddly but i'd reccomend sitting the speedo housing onto the delimiter then reaching up by the pedals to push it on. It's also a good idea to push in the secure tabs on the cable, as it slipped off first time.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
34
Nov 7, 2024 04:10 PM
matt12
ScoobyNet General
64
Sep 16, 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
Sep 14, 2015 09:36 AM




