2C ECU
#1
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: On the Edge
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
2C ECU
I currently have a Z4 ECU in place, which gets boost to .8 bar. As i have a 2C sitting about i was wondering if its possible to send it off and have it mapped, with the possibility of achieving more boost. Also what is a safe level of boost to take it up to ?
#3
I have 2x 2c ecu's, one std and one with a prova chip. std is 0.7-0.8 bar and the prova chip is 1.1 bar but is mapped for 100 ron fuel. Your best bet is probably to put a scoobyecu or esl chip in to achive higher boost. The esl chip is mapped for uk fuel I believe.
#4
Scooby Regular
Join Date: Sep 2005
Location: Whitley Bay
Posts: 1,563
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nickthehead
I have 2x 2c ecu's, one std and one with a prova chip. std is 0.7-0.8 bar and the prova chip is 1.1 bar but is mapped for 100 ron fuel. Your best bet is probably to put a scoobyecu or esl chip in to achive higher boost. The esl chip is mapped for uk fuel I believe.
Nick
#6
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: On the Edge
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PJB1
who sell these and how much?
sorry to but in. lol
just decatted my94 and wanted to know what to do next?
sorry to but in. lol
just decatted my94 and wanted to know what to do next?
My main goal is to hit 200BHP, 94WRXJDM (240BHP?) with z4 (255-260?) then a full decat (280?) just need that extra bit of oomph without any major changes really.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: On the Edge
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
Stick a post in the wanted section http://bbs.scoobynet.co.uk/forumdisplay.php?f=18
I did and had one on my doorstep a few days later. Its simply lift your passanger carpet up, undo a few bolts holding the metal plate over the ECU, plug then new one in and off you go. Oh and don't forget to unbolt your battery terminals and take them off before doing so. I understand its a 20BHP gain, although i haven't rolling roaded it yet, thats on Thursday .
I did and had one on my doorstep a few days later. Its simply lift your passanger carpet up, undo a few bolts holding the metal plate over the ECU, plug then new one in and off you go. Oh and don't forget to unbolt your battery terminals and take them off before doing so. I understand its a 20BHP gain, although i haven't rolling roaded it yet, thats on Thursday .
#9
Scooby Regular
Join Date: Sep 2005
Location: Whitley Bay
Posts: 1,563
Likes: 0
Received 0 Likes
on
0 Posts
ESL chips -
Do a search on them, quite new but highly recommended by all of us that did the GB. Decat and filter with ESL can see around 290bhp from a MY93 WRX.
Available at - http://www.enduringsolutions.com/
or http://cgi.ebay.co.uk/Subaru-Impreza...QQcmdZViewItem
Both the same!
Nick
Do a search on them, quite new but highly recommended by all of us that did the GB. Decat and filter with ESL can see around 290bhp from a MY93 WRX.
Available at - http://www.enduringsolutions.com/
or http://cgi.ebay.co.uk/Subaru-Impreza...QQcmdZViewItem
Both the same!
Nick
Last edited by nickwrxstiV2; 21 June 2006 at 08:18 AM.
#10
Scooby Regular
Thread Starter
Join Date: Nov 2005
Location: On the Edge
Posts: 935
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Nick, just emailed them. Not sure about £200 for a possible extra 10-15BHP but i suppose without replacing internals there's not much else that can be done for cheap.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM