st3v3

If i run my WRX02 plate carefully keeping the revs below 2500 rpm how long would it take to get the oil up to the right working temp from cold?

thanks for your time
st3v3

Hakon

10mins plus depending on air temperature etc

David_Harden

I agree. I'll time mine tonight and report (if I remember)

Scott.T

iTrader: (2)

Bloody ages. about 3-4 times as long as the water temp.

Ninnybobs

A lot longer than you may think.

The best thing I ever bought was an Oil Temp gauge.

I have a 4 mile commute to work (taking 8 minutes) and the oil temp has only reached 70 degrees.

Martin

rigga

iTrader: (4)

very true..was suprised exactly how long it takes to get the oil up to 80 degrees,oil temp gauge is very worthwhile..........

st3v3

Well i used to have a Focus st which had an oil temp gauge in as factory fitment,i could see that it took a fair amount of time to get to temp,this would be about 3 miles in distance though.

Now i let the scoob warm up for say 3-4mins and after about 10 more mins i have, on ONLY one or two occasions booted it but not for a long time nor a too long a distance but i have touched on 5000 RPM.

Do you think i have shortened the life of my engine by much?

banny sti

iTrader: (68)

Had an M3 previously, which had a oil temp gauge. It took approx 10 minutes or 5 miles to get up to temp.