what fault code is this ???
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2003
Location: on the B Roads..
Posts: 1,957
Likes: 0
Received 0 Likes
on
0 Posts
have done an ECU reset, the car is now showing no CEL errors, but it is hesitating majorly, especially when pulling off from a junction, feels like there is no power, then all of a sudden all the power comes on!!
any ideas ??
cheers, alex..
any ideas ??
cheers, alex..
#5
Scooby Regular
Join Date: Mar 2005
Location: using lots of petrol
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
i think the ecu saves the codes untill they have been cleared by resetting the ecu.
once reset drive the car & see if you get the cel light on again & the same codes
not sure about the throttle sensor but a mate got the knock sensor code.
after removing the i/c he found the sensor was loose ,tightened it up & this
solved the problem
chris
once reset drive the car & see if you get the cel light on again & the same codes
not sure about the throttle sensor but a mate got the knock sensor code.
after removing the i/c he found the sensor was loose ,tightened it up & this
solved the problem
chris
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM