rentonone

iTrader: (1)

im off to buy an sti8 intercooler from a breakers tomorrow to fit on my my00 classic but im just wondering if there was anythin else i need off the car while im there? or do i just need the intercooler itself?

p1mark

Left hand bracket, the D/V and recirc hose. nice to get the clutch reservoir/master cylinder and pipework as well but you can chop your existing one down

You will need a new turbo hose as well. neither the sti8 or my00 are long enough.

rentonone

iTrader: (1)

cheerz mate. what happens with the bonnet scoop and the tray under the bonnet? does it modifying or anythin?

p1mark

The version 8 bonnet scoop wont fit. you have to get an aftermarket one if you want a big scoop.

The undertray doesnt fit either. I made a new one but apparently the V8 one can be made to fit with a lot of bashing, chopping and drilling.

Johnny50

Here`s mine on an MY00.
Havnt sussed out what to do with the scoop and undertray yet though.

rentonone

iTrader: (1)

Scott.T

iTrader: (2)

Johny,

What samco did you use ? A 51m 90 Degree Elbow ??

silent running

So just out of interest, what is the best Subaru IC that is a straight swap for a 98-00 classic with no mucking about and retaining the same pipework, dv etc? Mine's a 98 WRX btw.

WUZ

iTrader: (14)

Problem with the STi TMIC on Johnny's car is that the TD04 is 48mm out and TMIC is 51mm in but I fitted this to his car as he was going to put on a TD05 (51mm out).

Russell

rentonone

iTrader: (1)

ok ive brought my sti8 intercooler today its mint im well pleased. they have got loads in stock if anyone is after one www.japperformanceparts.co.uk. they didnt have the left side backet that i need tho does anyone know where i can get one from? thanks

Scott.T

iTrader: (2)

Cheers mate, their gonna be all sold out now, by the time I get over to em'...

rentonone

iTrader: (1)

they had about 5 left today when i was there and sh*t loads of other bits

Scott.T

iTrader: (2)

I've just mailed Saj to see if he can put one by for me. I wasn't going up there till the 18th as it's the same day as the Sussex meet/open day at Gatwick Subaru.

rentonone

iTrader: (1)

how do you drop the resovoir down to get intercooler in?

Johnny50

Russell actually trimmed mine down by a few mm to get the overall height of it down.

rentonone

iTrader: (1)

cheers mate i'll give it a try. did you use the sti8 left side intercooler bracket or did u make your own?

Johnny50

To be honest i'm not sure.
As the intercooler was on Russells RA when i bought it from him, so Samco, Brackets etc.. all came with the cooler.

I'm sure Russell will answer when he can.