what else do i need to fit sti8 tmic onto my00 classic
im off to buy an sti8 intercooler from a breakers tomorrow to fit on my my00 classic but im just wondering if there was anythin else i need off the car while im there? or do i just need the intercooler itself?
|
Left hand bracket, the D/V and recirc hose. nice to get the clutch reservoir/master cylinder and pipework as well but you can chop your existing one down
You will need a new turbo hose as well. neither the sti8 or my00 are long enough. |
Originally Posted by p1mark
Left hand bracket, the D/V and recirc hose. nice to get the clutch reservoir/master cylinder and pipework as well but you can chop your existing one down
You will need a new turbo hose as well. neither the sti8 or my00 are long enough. |
The version 8 bonnet scoop wont fit. you have to get an aftermarket one if you want a big scoop.
The undertray doesnt fit either. I made a new one but apparently the V8 one can be made to fit with a lot of bashing, chopping and drilling. |
Here`s mine on an MY00.
Havnt sussed out what to do with the scoop and undertray yet though. http://img.photobucket.com/albums/v1.../Sti8tmic3.jpg http://img.photobucket.com/albums/v1.../Sti8tmic2.jpg http://img.photobucket.com/albums/v1.../Sti8tmic1.jpg |
(quote) Here`s mine on an MY00. Havnt sussed out what to do with the scoop and undertray yet though. cheers mate let me know what you decide to do with your scoop and undertray too. thanks |
Johny,
What samco did you use ? A 51m 90 Degree Elbow ?? |
So just out of interest, what is the best Subaru IC that is a straight swap for a 98-00 classic with no mucking about and retaining the same pipework, dv etc? Mine's a 98 WRX btw.
|
Problem with the STi TMIC on Johnny's car is that the TD04 is 48mm out and TMIC is 51mm in but I fitted this to his car as he was going to put on a TD05 (51mm out).
Russell |
ok ive brought my sti8 intercooler today its mint im well pleased. they have got loads in stock if anyone is after one www.japperformanceparts.co.uk. they didnt have the left side backet that i need tho does anyone know where i can get one from? thanks
|
Originally Posted by rentonone
ok ive brought my sti8 intercooler today its mint im well pleased. they have got loads in stock if anyone is after one www.japperformanceparts.co.uk. they didnt have the left side backet that i need tho does anyone know where i can get one from? thanks
|
Originally Posted by Scott.T
Cheers mate, their gonna be all sold out now, by the time I get over to em'...:(
|
I've just mailed Saj to see if he can put one by for me. I wasn't going up there till the 18th as it's the same day as the Sussex meet/open day at Gatwick Subaru.
|
how do you drop the resovoir down to get intercooler in?
|
Russell actually trimmed mine down by a few mm to get the overall height of it down.
|
Originally Posted by Johnny50
Russell actually trimmed mine down by a few mm to get the overall height of it down.
|
To be honest i'm not sure.
As the intercooler was on Russells RA when i bought it from him, so Samco, Brackets etc.. all came with the cooler. I'm sure Russell will answer when he can. |
All times are GMT +1. The time now is 07:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands