93 wrx ecu
#1
93 wrx ecu
can anyone tell me what ecu i should have in my93wrx jdm. and how to identify it(markings,numbers,codes) reason i ask is because scott t informed me its running higher than std boost.
thanks
thanks
#3
Scooby Regular
Join Date: May 2002
Location: Taunton
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by Roojai; 05 January 2006 at 08:02 AM.
#4
Scooby Regular
iTrader: (2)
cheers Roojai,
Although I wouldn't treat that prova site as gospel, some of it isn't quite correct IMO i.e W9 is WRX RA.
Well all the Scooby WRX RA footwell's I've crawled into were.
All of the above run 11.47psi
Your ECU may look like a standard one from the outside, but crack it open and see if there is a chip or daughter board fitted in one corner.
If the screws come out easy it's a sign that someone has already been in there chipping. If their a b'stard to get out then chances are it's not. I can normally tell if it's been chipped before the lid comes off.
Although I wouldn't treat that prova site as gospel, some of it isn't quite correct IMO i.e W9 is WRX RA.
Well all the Scooby WRX RA footwell's I've crawled into were.
All of the above run 11.47psi
Your ECU may look like a standard one from the outside, but crack it open and see if there is a chip or daughter board fitted in one corner.
If the screws come out easy it's a sign that someone has already been in there chipping. If their a b'stard to get out then chances are it's not. I can normally tell if it's been chipped before the lid comes off.
Last edited by Scott.T; 05 January 2006 at 08:58 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM