What should they be reading?
#1
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: Herefordshire
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
What should they be reading?
What should they be reading?
the first one is boost and accelerating hard its hitting 1.3 bar, the second it temp and reading just over 70 an the third is pressure, I don’t know if it water or oil but is reading 10 witch is the top.
Just checking they are right.
Merry Christmas all
#3
Scooby Regular
iTrader: (1)
Join Date: Aug 2002
Location: Dorset
Posts: 1,616
Likes: 0
Received 0 Likes
on
0 Posts
Going on your username, I assume you drive a P1.
In standard form boost should hit 1.1 bar and tail off to around 0.95. As it's cold out at the moment you will often hit higher boost.
Oil temp seems low, car needs to be driven quite sometime for this to rise.
Oil pressure can change depending on how hot / cold the oil is.
In standard form boost should hit 1.1 bar and tail off to around 0.95. As it's cold out at the moment you will often hit higher boost.
Oil temp seems low, car needs to be driven quite sometime for this to rise.
Oil pressure can change depending on how hot / cold the oil is.
#4
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: Herefordshire
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Yes it is on a P1. Oil pressure goes strait to number 10 as soon as the engine is started, I did think the temp was also a bit low. Will get it checked out tomorrow.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM