rsjohn

iTrader: (3)

Hi, iv just bought a 97 wrx, it was imported into uk april this year.
The speedo has mph on but goes up to 110mph, i require one that goes to 160mph so what is needed to do this conversion please? i know i need to get the restriction limiter removed also.




john

ben1413

iTrader: (5)

The best thing to do is buy a set of white dials from Lockwood (or similar) that read 160 mph and then get the speedo converted.

Ben

rsjohn

iTrader: (3)

How do i get the speedo converted and where please?



john

ben1413

iTrader: (5)

I've seen a few on ebay for about £45. Not sure about any other places.

Ben

Hol

iTrader: (1)

Hmm?? Sounds a bit strange the speedo going to 110MPH. Has someone already replaced the dial and does your car cut-out at 107mph?

Normally the 97 has a cable drive speedo that goes up to 180Kmh's. (107mph = 171kmh)

You buy and fit a 8/5 gearing box that fits in the cable and drops the speed to the speedo so that you have to be doing 171mph to hit the limiter.

All you do then is fit a MPH sticker.

Hol

iTrader: (1)

Look in the back of Japanease performance mag in Smiths or contact any of the SVA imprt companies.

rsjohn

iTrader: (3)

The speedo has been changed to mph 110, it was imported into uk april this year, my old 93 wrx sti had 180mph on clock can i not get one of thesed and fit with the mod??


john

Hol

iTrader: (1)

I reckon so. Get a JDM dash and change the clock.

The only thing that could screw it, is if they have fitted a UK gearbox at some time???