vanman

Hi
I'm trying to remove my inlet manifold on mt sti 4,having a few problems on the turbo side of the manifold?
It seems to be hitting on something when I try to lift it,it only moves half inch then gets stuck.It seems to be hitting the turbo inlet hose,but I cant get that off without the manifold coming off first.
Any ideas?
Colin

Jolly Green Monster

iTrader: (4)

Fuel pressure reg?

Simon

jim litten

Coolant pipe that runs through the runners to the header tank.

WUZ

iTrader: (14)

Remember that the harness for the wiring for the drivers side injectors,MAF, etc is tie-wrpapped under there as well!

Just take you time and it'll come out slowly once you remove them.

Russell

vanman

I think it may be the fuel pressure regulator,I have moved the harness's out of the way and pretty much everything else.The fuel pressure reg does seem to be the problem though.I'll try tomorrow.
Thanks for the replies.
Colin

stockcar

the fuel pipes run under the inlet pipe BUT are bolted to the manifold.....................it will no doubt be this thats stopping you

alyn

vanman

Is ther any way of unbolting them?I presume the bolts are under the manifold?
Colin

vanman

BTTT

vanman

It's off!**** knows how i'm going to remember where everything goes when I attempt to put it back on