Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Stalling & Tick Over Problems

Thread Tools
 
Search this Thread
 
Old Aug 17, 2005 | 11:23 PM
  #1  
Darren@JDM's Avatar
Darren@JDM
Thread Starter
Former Sponsor
iTrader: (53)
 
Joined: Mar 2003
Posts: 2,912
Likes: 0
Default Stalling & Tick Over Problems

I have a version 1 wrx sti import impreza and when its at fully warmed up tempreature & you come to slow down to stop at juntions etc it stalls.It also has slight hesitation when slowly putting the foot down and when stopped and ticking over the revs go up and down constantly.Its fine when cold just once it warms up after a few mins.Any idea`s ???????

Cheers
Reply
Old Aug 18, 2005 | 12:08 AM
  #2  
vulnax999's Avatar
vulnax999
Scooby Senior
20 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: May 2003
Posts: 4,375
Likes: 11
Default

Should I be the first to say ...


MAF sensor has failed!

Check Lambda sensor also, otherwise take it to a good garage to determine the problem.
Reply
Old Aug 18, 2005 | 01:45 AM
  #3  
pedroartois's Avatar
pedroartois
Scooby Regular
 
Joined: Aug 2005
Posts: 42
Likes: 0
From: Leeds
Default

Originally Posted by vulnax999
Should I be the first to say ...


MAF sensor has failed!

Check Lambda sensor also, otherwise take it to a good garage to determine the problem.
Hey thanks for the info - my scoobie is acting up like that and by coincidence so is my pals. Are the replacement units expensive?

Last edited by pedroartois; Aug 18, 2005 at 01:46 AM. Reason: wrong emote
Reply
Old Aug 18, 2005 | 07:00 AM
  #4  
cossie01's Avatar
cossie01
Scooby Regular
 
Joined: Jun 2003
Posts: 1,202
Likes: 0
Default

couldn't it simply be the idle control valve playing up ?

Surely it would be worth looking / cleaning that before worrying about MAF ?
Reply
Old Aug 18, 2005 | 10:06 AM
  #5  
Darren@JDM's Avatar
Darren@JDM
Thread Starter
Former Sponsor
iTrader: (53)
 
Joined: Mar 2003
Posts: 2,912
Likes: 0
Default Maf

Changed my MAF yesterday but with no change.Will try idle valve today
Reply
Old Aug 18, 2005 | 01:28 PM
  #6  
Darren@JDM's Avatar
Darren@JDM
Thread Starter
Former Sponsor
iTrader: (53)
 
Joined: Mar 2003
Posts: 2,912
Likes: 0
Default Idle valve

were is the idle control valve located is it on the inlet manifold with a sensor on the top and a couple og black pipes going to it
Reply
Old Aug 18, 2005 | 07:21 PM
  #7  
Darren@JDM's Avatar
Darren@JDM
Thread Starter
Former Sponsor
iTrader: (53)
 
Joined: Mar 2003
Posts: 2,912
Likes: 0
Default

changed idle valve still no change will check lambda next
Reply
Old Aug 18, 2005 | 08:48 PM
  #8  
flat4_ire's Avatar
flat4_ire
Scooby Regular
 
Joined: Apr 2005
Posts: 1,418
Likes: 0
From: Ireland-The One And Only
Default

Originally Posted by scoobymanuk
changed idle valve still no change will check lambda next
some bull**** on this site man, it wud sicken ya! a lot of scoobs do this, my V4 98 type r idles funny wen stoppin then neutral, up and down for 10 secs then evens out fine..got it check a few times, cleaned idle control valve and maf, helped a bit but still there. i think unless you have a completely standard scoob you will suffer from this sometimes?
Reply
Old Aug 19, 2005 | 12:39 PM
  #9  
Darren@JDM's Avatar
Darren@JDM
Thread Starter
Former Sponsor
iTrader: (53)
 
Joined: Mar 2003
Posts: 2,912
Likes: 0
Default

Have owned this car for over 2 years and its only just started doing it so something aint right.Also have another wrx and its got similar mods and its fine
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jonny mac
ScoobyNet General
10
Oct 9, 2015 12:25 PM
InTurbo
Other Marques
20
Oct 8, 2015 08:59 PM
Littleted
Non Scooby Related
6
Oct 2, 2015 11:31 AM
WrxSti03
Drivetrain
0
Sep 30, 2015 10:24 PM
Baskey
General Technical
3
Sep 25, 2015 03:45 PM




All times are GMT +1. The time now is 10:30 AM.